40×40 IS-40
Detalles generales
Datalogic
Modelos con Salidas 4 hilos a transistor NPN o PNP NO y NC.
Modelos con Salidas 2 hilos 20 – 250 VAC
Modelos con Salida Analogica 0-20mA
Salida a terminales.
Plástico
LINEA 10-30 VDC
| NOMINAL SWITCHING DISTANCE (Sn) | FLUSH: 15 mm NON FLUSH: 30 mm |
| NOMINAL VOLTAGE | 10 ÷ 30 VDC (-15 / +10%) |
| RESIDUAL RIPPLE | ≤ 10% |
| HYSTERESIS | < 15% |
| MAX. OUTPUT CURRENT | 200 mA |
| RESIDUAL CURRENT | < 10 mA |
| VOLTAGE DROP (Sensor ON) | < 1.5 V (l = 100 mA) |
| OPERATION LED | Present |
| SWITCHING FREQUENCY | 100Hz |
| START UP DELAY | <50ms |
| REPEATABILITY | ≤ 1% |
| SHORT CIRCUIT PROTECTION | Present (self-resetting) |
| ELECTRIC PROTECTIONS | Against polarity reversal – inductive loads |
| TEMPERATURE LIMITS | – 25 ÷ +75 °C |
| PROTECTION DEGREE | IP 67 |
| HOUSING MATERIAL | PBT |
| WEIGHT – | 262 g |
LINEA 20-250 VAC
| NOMINAL SWITCHING DISTANCE (Sn) | FLUSH: 15 mm NON FLUSH 30mm |
| NOMINAL VOLTAGE | 20 ÷ 250 VAC |
| NET FREQUENCY | 50-60Hz |
| HYSTERESIS | < 15% |
| MAX. OUTPUT CURRENT | 200 mA |
| MIN. OUTPUT CURRENT | 20 mA |
| MAX. INRUSH CURRENT (20mS) | 1,5A |
| RESIDUAL CURRENT | < 0,7 mA |
| VOLTAGE DROP (Sensor ON) | < 10VAC; 8 VDC V (l = 100 mA) |
| OPERATION LED | Present |
| SWITCHING FREQUENCY | 25 Hz |
| REPEATABILITY | ≤ 1% |
| TEMPERATURE LIMITS | – 25 ÷ +70 °C |
| PROTECTION DEGREE | IP 67 |
| HOUSING MATERIAL | PBT |
| WEIGHT – M12 connector output – | 262 g |
Salida Analógica
| NOMINAL SWITCHING DISTANCE (Sn) | 7-20 mm |
| NOMINAL VOLTAGE | 10 ÷ 30 VDC (-15 / +10%) |
| RESIDUAL RIPPLE | ≤ 10% |
| HYSTERESIS | < 15% |
| OUTPUT | 0-20 mA 200 ohm max. |
| SWITCHING FREQUENCY | 100Hz |
| REPEATABILITY | 0,02 mm |
| SHORT CIRCUIT PROTECTION | Present (self-resetting) |
| ELECTRIC PROTECTIONS | Against polarity reversal – inductive loads |
| TEMPERATURE LIMITS | – 25 ÷ +75 °C |
| PROTECTION DEGREE | IP 67 |
| HOUSING MATERIAL | PBT |
| WEIGHT – | 242 g |
Consúltanos
Documentos
Comentarios