Detalles generales

Optex FA

Gran distancia de sensado.
Carcasa totalmente metálica, de latón.
Facil de alinear, incluso cuando las distancias son grandes.Especificaciones


Model Through-beam Retro-reflective Diffuse-reflective Limited Range
Cable type CTD-2500(N/P)-R CRD-400(N/P)-R CDD-100(N/P)-R CDD-11(N/P)-R
Sensing distance *1 25 m 0.01 to 4 m 0 to 1 m 0 to 110mm
Light Source Red LED
Spot size (approx.) φ1600mm / 25m φ240mm / 4m φ70mm / 1m φ5mm / 110mm
Supply voltage DC10 to 30V Including ripple (P-P) 10%
Current consumption Emitter : 20mA max. 25mA max. 30mA max. 25mA max.
Receiver : 25mA max.
Response time 500μs max.
Control output NPN/PNP Open collector?100mA max. / DC30V max. (Residual voltage 1.8V max.)
Operation mode Light ON, Dark ON?Selectable by control wire
Sensitivity adjustment 1 turn volume
Indicator Output indicator (Orange LED) / Stability indicator (Green LED)
Vibration Resistance 10 to 100 Hz; max.1.5mm (p-p), max.150m/s2, 8 hours in each of the X, Y, and Z directions
Shock Resistance Approximately 50 G (500 m/s2), 3 times in each of the X, Y, and Z directions
Ambient temp. /humidity -25 to 55?/35 to 85%RH?No condensation or freezing?
Storage temp. /humidity -30 to 70?/35 to 95%RH?No condensation or freezing?
Applicable regulations/standards EMC Directive (2014/30/EU) / IEC 60947-5-2 : 2007/A1 : 2012
Protection category/Material IEC 60529 : IP67 / Case : Brass Ni plated, Front Cover : PMMA
Documentos
Comentarios

Dejar un comentario

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *