J3
Detalles generales
Optex FA
El sensor J3M es un detector de Marca, con boton de Teach.
El sensor reflectivo J3R tiene una óptica permite proyectar un spot de 3.0 mm.
El sensor BGS-3JH tiene un tamaño de spot de 1,5 mm.
Cuerpo relleno de epoxi provee protección ante las vibraciones.
Especificaciones
| Model | Mark Sensor | Retro reflective Narrow view | BGS | |
| Cable type | NPN | J3M-GH(S)01N | J3R-H(S)100N | BGS-3JH(S)05N |
| PNP | J3M-GH(S)01P | J3R-H(S)100P | BGS-3JH(S)05P | |
| Connector type | NPN | J3M-GH(S)01CN | J3R-H(S)100CN | BGS-3JH(S)05CN |
| PNP | J3M-GH(S)01CP | J3R-H(S)100CP | BGS-3JH(S)05CP | |
| (Remark) | *H=head-on, S=Side-on | |||
| Sensing distance | 10 +/- 2m | 0.05 – 1m | 15-50mm/18% | |
| Power consumption | 40mA Max | |||
| Response time | 0.2m sec | 0.7 m sec | ||
| Hysteresis | N/A | 5% | ||
| Min detectable object | Apr 2x 5mm @10mm | 1mm@100mm | 0.5mm round@150mm | |
| Light source | Green | Red LED with special focusing lens | Red | |
| Off delay | 40msec fixed | |||
| Supply Voltage | DC 10 to 30V including 10% ripple | |||
| Control Output | NPN or PNP Open collector, 100mA Max / 30 VDC | |||
| Sensitivity adjustment | Teach-in | |||
| Remote teach-in | Available | |||
| Shock resistance | 100G (1000m/s2) XYZ axis 3 times | |||
| Remarks | Light ON/ Dark ON selectable | |||
| Operation temp | -25 up to 55ºC | |||
| Operating humidity | 35 up to 95% RH | |||
| Storage conditions | -40 up to 70ºC, 35-95%RH | |||
| Enviromental illuminance | Sunlight: 10000 lux Max, Incandescent lamp: 3000 lux | |||
| Insulation resistance | Min 20M ohm / DC500V | |||
| Conformity | JIS, CE, CRU | |||
| (JIS C4525) | 1u sec, 300V | |||
| Feilen test | Level 3 | |||
| VDE protection | Class 3 | |||
| Vibration resistance | 10 to 55 Hz amplitude 1.5mm, XYZ for 2 hours | |||
| Protection category | IP67 | |||
| Material | Case: PBT, Lens: PMMA | |||
Comentarios