Ø 30MM IS-30
Detalles generales
Datalogic
Salidas 3 hilos a transistor NPN o PNP NO o NC.
Sensores NAMUR.
Salida 2 y 3 hilos 20-250VAC
Salida a cable o conector M18.
Versiones con rango extendido.
LINEA 10-30 VDC
| NOMINAL SWITCHING DISTANCE (Sn) | FLUSH: 10 mm NON FLUSH: 15 mm |
| NOMINAL VOLTAGE | 10 ÷ 30 VDC (-15 / +10%) |
| RESIDUAL RIPPLE | ≤ 10% |
| HYSTERESIS | < 10% |
| MAX. OUTPUT CURRENT | 200 mA |
| RESIDUAL CURRENT | < 10 mA |
| VOLTAGE DROP (Sensor ON) | < 1.8 V (l = 100 mA) |
| OPERATION LED | Present |
| SWITCHING FREQUENCY | 300Hz |
| START UP DELAY | <50ms |
| REPEATABILITY | ≤ 1% |
| SHORT CIRCUIT PROTECTION | Present (self-resetting) |
| ELECTRIC PROTECTIONS | Against polarity reversal – inductive loads |
| TEMPERATURE LIMITS | – 25 ÷ +60 °C |
| PROTECTION DEGREE | IP 67 |
| HOUSING MATERIAL | Stainless Steel |
| WEIGHT – M12 connector output – 55 g | 60 g |
LINEA 20-250 VAC
| NOMINAL SWITCHING DISTANCE (Sn) | FLUSH: 2 mm |
| NOMINAL VOLTAGE | 20 ÷ 250 VAC |
| NET FREQUENCY | 50-60Hz |
| HYSTERESIS | < 10% |
| MAX. OUTPUT CURRENT | 500 mA |
| MIN. OUTPUT CURRENT | 20 mA |
| MAX. INRUSH CURRENT (20mS) | 1,5A |
| RESIDUAL CURRENT | < 0,7 mA |
| VOLTAGE DROP (Sensor ON) | < 5 V (l = 100 mA) |
| OPERATION LED | Yellow |
| SWITCHING FREQUENCY | 25 Hz |
| REPEATABILITY | ≤ 5% |
| START UP DELAY | |
| TEMPERATURE LIMITS | – 25 ÷ +70 °C |
| PROTECTION DEGREE | IP 67 |
| HOUSING MATERIAL | Nickel Plated brass |
| WEIGHT – M12 connector output – | 95 g |
NAMUR
| NOMINAL SWITCHING DISTANCE (Sn) | FLUSH: 2 mm NO FLUSH: 4 mm |
| NOMINAL VOLTAGE (Load resistence 1 K) |
7.7 ÷ 9 V DC |
| DC SUPPLY VOLTAGE | 5 ÷ 24 V DC |
| RESIDUAL RIPPLE | ≤ 10% |
| HYSTERESIS | < 10% |
| OUTPUT CURRENT (Metal present) | ≤ 1 mA |
| OUTPUT CURRENT (Metal absent) | ≤ 3 mA |
| SWITCHING FREQUENCY | 2000 Hz |
| REPEATABILITY | ≤ 3% |
| TEMPERATURE LIMITS | -25 ÷ +60 °C |
| PROTECTION DEGREE | IP 67 |
| DEVICE MARKING | II 3D IP67 T6X |
| CABLE LENGTH | 2 m |
| CABLE SECTION | 2 x 0.25 mm2 |
| HOUSING MATERIAL | Stainless Steel |
| WEIGHT – Cable output – | 110 g |
| WEIGHT – M12 connector output – | 60 g |
Consúltanos
Documentos
Comentarios